Have you ever tried to open your LG microwave and felt the handle wobble or come off in your hand? If so, you are not alone.

Many LG microwave owners have faced this issue and wondered how to fix it. A loose handle can make opening and closing the microwave door hard, affecting your food’s cooking time and quality.

In addition to potential harm, there is a risk of injury if the handle breaks off entirely and exposes sharp edges or electrical wires.

I will show you how to fix the LG microwave loosen handle in simple steps. You don’t need special tools or skills, just patience and common sense. Following this guide, you can restore your microwave handle to its original condition and enjoy using your appliance again.

Now the basic steps to fix the LG microwave loosen handle are:

1. Unplug your microwave from power.
2. Assess the damage and identify the type of handle you have.
3. Remove the inner panel of the microwave door.
4. Substitute the damaged handle with a fresh one.
5. Reinstall the microwave door panel and test your work.

Step 1: Unplug Your Microwave From Power

Before working on your microwave:

1. Unplug it from the power source. Touching any live wires or components inside the microwave will prevent electric shocks or burns.
2. Locate the power cord behind or under the appliance to unplug your microwave and pull it out from the wall socket.
3. Ensure the cord is not tangled or damaged, and keep it away from water or heat sources.

Step 2: Assess the Damage and Identify the Type of Handle You Have

The next step is to assess the damage and identify the type of handle you have. There are two main types of handles for L.G. microwaves: one that is attached to the door frame with screws and one that is attached to the glass panel with clips.

To find out which type you have, look at the back of the microwave door and see if any screws or clips are holding the handle in place.

If you see screws, you have the first type of handle. If you see clips, you have the second type of handle. You can also refer to the model number of your microwave and search for it online to see what kind of handle it has.

The most common causes of the handle loosening are:

1. The screws or clips that hold the handle in place have become loose or broken as time passes, either through natural wear and tear or the application of excessive force, changes may occur.
2. The handle itself has cracked or broken due to impact or heat.

Depending on the cause, you may need to tighten or replace the screws or clips or replace the handle entirely. You can find the replacement parts online or at your local hardware store. Make sure you get the right size and model for your microwave.

Step 3: Remove the Inner Panel of the Microwave Door

To access the handle, you need to remove the inner panel of the microwave door. This is the part that covers the glass and the handle. You will need a flathead screwdriver and a putty knife to remove the inner panel.

• First, open the microwave door and insert the screwdriver into the gap between the inner panel and the outer frame. Gently pry the inner panel away from the frame, starting from the top and working your way around the edges. Be careful not to damage the glass or the frame.
• Next, use the putty knife to release the clips that hold the inner panel to the glass. Slide the putty knife along the edge of the panel and push the clips inward. You may need to apply some force to pop the clips out.
• Finally, lift the inner panel off the glass and set it aside.

Step 4: Remove the Broken Handle and Replace it With a New One

Now that you have removed the inner panel, you can see the handle and how it is attached to the door. Depending on the type of handle you have, you will need to do one of the following:

• If you have the kind of handle that is attached to the door frame with screws, you will need to unscrew the screws and take out the broken handle. Then, align the new handle with the holes and screw it in place. Make sure the screws are tight, and the handle is secure.
• If you have the type of handle attached to the glass panel with clips, you must unhook the clips and pull out the broken handle. Then, insert the new handle into the slots and snap the clips into place. Make sure the clips are locked and the handle is stable.

Step 5: Reinstall the Microwave Door Panel

To finish the repair, you need to reinstall the microwave door panel. This is the reverse of step 3.

• First, place the inner panel over the glass and align the clips with the holes. Press the panel firmly until the clips snap into place. You may need to use the putty knife to help the clips go in.
• Next, fit the inner panel into the outer frame and push it until it clicks. You may need to use the screwdriver to help the panel go in.
• Finally, close the microwave door and check if it is aligned and flush with the frame.

Step 6: Test Your Work

The last step is to test your work and ensure everything works properly. To do this, plug your microwave back into the power source and try opening and closing the door.

The handle should be solid and smooth, and the door should open and close without problems. If you notice any issues, you may need to adjust the screws or clips or check the alignment of the panel and the frame.

Conclusion

I have shown you how to fix the LG microwave loosen handle in simple steps. By following this guide, you have saved time and money and improved the performance and safety of your microwave.

You have also learned some basic skills and knowledge to apply to other appliances and projects. I hope you found this blog post helpful and informative. If you have any questions or comments, please leave them below.